Feature |
Value |
| Size of actuator |
0053 |
| Flange hole pattern |
F05
F07 |
| Swivel angle |
92 deg |
| Shaft connection depth |
19.3 mm |
| Note regarding end position setting range |
One selectable end position is adjustable |
| Fitting connection conforms to standard |
ISO 5211 |
| Cushioning |
No cushioning |
| Assembly position |
Any |
| Mode of operation |
single-acting |
| Design structure |
Yoke kinematics |
| Position detection |
No |
| Closing direction |
right-closing |
| Valve connection conforms to standard |
VDI/VDE 3845 (NAMUR) |
| Safety Integrity Level (SIL) |
Product can be used in SRP/CS up to SIL 2 (high demand)
Product can be used in SRP/CS up to SIL 2 low demand |
| Supply pressure for spring strength |
4.2 bar |
| Operating pressure |
4.2 ... 8.4 bar |
| Nominal operating pressure |
5.6 bar |
| CE mark (see declaration of conformity) |
to EU directive explosion protection (ATEX) |
| ATEX category Gas |
II 2G |
| ATEX category Dust |
II 2D |
| Explosion ignition protection type Gas |
Ex h IIC T6...T3 Gb X |
| Explosion ignition protection type Dust |
Ex h IIIC T85°C...T200°C Db X |
| Explosion-proof ambient temperature |
-50°C <= Ta <= +60°C |
| Operating medium |
Compressed air in accordance with ISO8573-1:2010 [7:4:4] |
| Note on operating and pilot medium |
Lubricated operation possible (subsequently required for further operation) |
| Corrosion resistance classification CRC |
2 - Moderate corrosion stress |
| Ambient temperature |
-20 ... 80 °C |
| Torque at rated operating pressure and 0° rotation angle |
62 Nm |
| Torque at nominal operating pressure with 50° swivel angle |
32.5 Nm |
| Torque at nominal operating pressure with 90° swivel angle |
48 Nm |
| Spring return torque with 0° swivel angle |
26 Nm |
| Spring return torque with 50° swivel angle |
19.5 Nm |
| Spring return torque at 90° |
40 Nm |
| Spring strength |
3 |
| Air consumption at 0.6 MPa (6 bar, 87 psi) per cycle 0°-nominal swivel angle-0° |
2.1 l |
| Product weight |
4,500 g |
| Shaft connection |
T17 |
| Pneumatic connection |
G1/8 |
| Materials note |
Conforms to RoHS |
| Material cover |
Wrought Aluminium alloy |
| Material seals |
FPM
NBR
PUR |
| Material housing |
Wrought Aluminium alloy |
| Material screws |
High alloy steel |
| Material shaft |
High alloy steel |
| Material number for shaft |
1.4305 |
Newsletter