Feature |
Value |
| Size |
16 |
| Stroke per gripper jaw |
3 mm |
| Max. replacement accuracy |
<= 0.2 mm |
| Max. angular gripper jaw backlash ax,ay |
<= 0.1 deg |
| Max. gripper jaw backlash Sz |
<= 0.02 mm |
| Rotationally symmetrical |
<= 0.2 mm |
| Repetition accuracy, gripper |
<= 0.03 mm |
| Number of gripper fingers |
2 |
| Assembly position |
Any |
| Mode of operation |
double-acting |
| Gripper function |
Parallel |
| Design structure |
Inclined plane
guided motion sequence |
| Position detection |
For proximity sensor |
| Total gripping force at 0.6 MPa (6 bar, 87 psi), opening |
120 N |
| Total gripping force at 0.6 MPa (6 bar, 87 psi), closing |
106 N |
| Operating pressure |
3 ... 8 bar |
| Operating pressure, sealing air |
0 ... 0.5 bar |
| Max. operating frequency of gripper |
<= 3 Hz |
| Min. opening time at 0.6 MPa (6 bar, 87 psi) |
9 ms |
| Min. closing time at 0.6 MPa (6 bar, 87 psi) |
11 ms |
| Operating medium |
Compressed air in accordance with ISO8573-1:2010 [7:4:4] |
| Note on operating and pilot medium |
Lubricated operation possible (subsequently required for further operation) |
| Corrosion resistance classification CRC |
2 - Moderate corrosion stress |
| Protection class |
IP40 |
| Ambient temperature |
5 ... 60 °C |
| Gripping force per gripper jaw at 0.6 MPa (6 bar, 87 psi) opening |
60 N |
| Gripping force per gripper jaw at 0.6 MPa (6 bar, 87 psi) closing |
53 N |
| Mass moment of inertia |
0.141 kgcm2 |
| Max. force on gripper jaw Fz static |
200 N |
| Max. torque at gripper Mx static |
10 Nm |
| Max. torque at gripper My static |
12 Nm |
| Max. torque at gripper Mz static |
6 Nm |
| Lubrication interval for guide components |
5 Mio SP |
| Max. mass per external gripper finger |
40 g |
| Product weight |
85 g |
| Mounting type |
Internal thread and centring sleeve
With through-hole and centring sleeve
With through-hole and dowel pin
With internal thread and dowel pin
Optional |
| Pneumatic connection, sealing air |
M3 |
| Pneumatic connection |
M5 |
| Materials note |
Free of copper and PTFE
Conforms to RoHS |
| Material cover cap |
High alloy steel, non-corrosive |
| Material housing |
Aluminium
Anodised |
| Material gripper jaws |
Steel
Hardened |
Newsletter