Feature |
Value |
| Dimensions W x L x H |
42,2 mm x 125,8 mm x 76,5 mm |
| Grid dimension |
18.9 mm |
| Diagnostics via LED |
Bus error
Force mode
Power supply electronics/sensors
Power supply load
System error |
| Diagnostics via bus |
Wire break
Short circuit
parameterisation error
Overflow buffer
Upper limit value not observed
Transmission error
Lower limit value not observed
Undervoltage
Watchdog/I/O status
Requested function not supported
Not ready for data exchange |
| Configuration support |
Device database file |
| Max. no. of modules |
10 |
| System parameters |
Diagnostic memory
Fail-safe reaction
Force mode
System start |
| Module parameters |
Undervoltage diagnostics
Process value representation of analogue modules |
| Control elements |
DIL switches |
| Intrinsic current consumption at nominal operating voltage for electronics/sensors |
Typically 75 mA |
| Max. power supply |
8 A |
| Nominal operating voltage DC for electronics/sensors |
24 V |
| Power failure buffering |
20 ms |
| Permissible voltage fluctuations for electronics/sensors |
± 25 % |
| Power supply, function |
Electronics and sensors |
| Power supply, type of connection |
Terminal strip |
| Power supply, connection technology |
Cage clamp terminal |
| Power supply, number of pins/wires |
4 |
| Power supply, conductor diameter |
0.2 ... 1.5 mm2 |
| Power supply, note on conductor diameter |
0.2 - 2.5 mm² for flexible conductors without wire end sleeves |
| Authorisation |
RCM Mark
c UL us - Listed (OL) |
| KC mark |
KC-EMV |
| CE mark (see declaration of conformity) |
to EU directive for EMC |
| Certificate issuing department |
UL E239998 |
| Vibration resistance |
Transport application test at severity level 1 in accordance with FN 942017-4 and EN 60068-2-6 |
| Shock resistance |
Shock test with severity level 1 in accordance with FN 942017-5 and EN 60068-2-27 |
| Corrosion resistance classification CRC |
0 - No corrosion stress |
| Storage temperature |
-20 ... 70 °C |
| Relative air humidity |
95 %
non-condensing |
| Protection against direct and indirect contact |
Protective extra-low voltage with safe disconnection (PELV) |
| Protection class |
IP20 |
| Ambient temperature |
-5 ... 50 °C |
| Note on ambient temperature |
-5 - 60°C for vertical installation |
| Product weight |
145 g |
| Maximum address volume for outputs |
64 Byte |
| Note on outputs |
62bytes with I/O diagnostic interface
64bytes with status bits
64bytes without diagnostics |
| Maximum address volume for inputs |
64 Byte |
| Note on inlets |
62bytes with I/O diagnostic interface
63bytes with status bits
64bytes without diagnostics |
| Fieldbus interface, electrical isolation |
Yes |
| Fieldbus interface, transmission rate |
9,6 kbit/s
19,2 kbit/s
93,75 kbit/s
187,5 kbit/s
500 kbit/s
1,5 Mbit/s
3 Mbit/s
6 Mbit/s
12 Mbit/s |
| Fieldbus interface |
PROFIBUS |
| Fieldbus interface, type of connection |
Plug socket |
| Fieldbus interface, connection technology |
Sub-D |
| Fieldbus interface, number of pins/wires |
9 |
| Fieldbus interface, protocol |
PROFIBUS DP |
| Fieldbus interface, max. address volume for inputs |
64 Byte |
| Fieldbus interface, max. address volume for outputs |
64 Byte |
| Service interface, function |
Diagnostics and parameterisation |
| Service interface, connection type |
Plug socket |
| Service interface, connection technology |
USB 2.0 type B mini |
| Service interface, number of pins/wires |
5 |
| Note regarding fieldbus interface |
Optional connection technology with accessories:
Plug connector/socket M12x1 B-coded, 5-pin, degree of protection IP65 |
| Mounting type |
with top-hat rail |
| Materials note |
Contains PWIS substances
Conforms to RoHS |
| Material housing |
PA |
Newsletter