Feature |
Value |
| Valve function |
3/2 closed, monostable |
| Type of actuation |
electrical |
| Width |
65 mm |
| Standard nominal flow rate |
1,050 l/min |
| Operating pressure |
3 ... 10 bar |
| Design structure |
Piston slide |
| Type of reset |
mechanical spring |
| Protection class |
IP65
NEMA 4 |
| Authorisation |
c UL us - Recognized (OL) |
| KC mark |
KC-EMV |
| CE mark (see declaration of conformity) |
to EU directive for EMC
to EU directive for machinery |
| Certificate issuing department |
UL MH19482 |
| Exhaust-air function |
throttleable |
| Sealing principle |
soft |
| Assembly position |
Any |
| Conforms to standard |
EN 60947-5-2 |
| Manual override |
None |
| Type of piloting |
Piloted |
| Pilot air supply |
Internal |
| Flow direction |
non reversible |
| Measuring principle |
Inductive |
| Overlap |
Positive overlap |
| Reverse polarity protection sensor |
For all electrical connections |
| Safety function |
Exhausting
Manipulation/start-up protection |
| Performance level (PL) |
Vent/up to Category 4, PL e
Protection against manipulation, prevention of unexpected start-up, up to Category 4, Performance Level e |
| Note on forced dynamisation |
Switching frequency at least once a week |
| Signal status display |
with accessories |
| Switching position sensing |
Normal position with sensor |
| Switching status display sensor |
LED |
| Pilot pressure |
3 ... 10 bar |
| Suitability for vacuum |
No |
| Standard flow rate exhaust 0.6->0 MPa (6->0 bar, 87->0 psi) |
2,650 l/min |
| Standard flow rate exhaust 0.6->0 MPa (6->0 bar, 87->0 psi) in the event of a fault |
1,050 l/min |
| Switching time off |
54 ms |
| Switching time on |
24 ms |
| Valve - sensor switching time on |
58 ms |
| Valve - sensor switching time off |
11 ms |
| Duty cycle |
100 % |
| Max. positive test pulse with logic 0 |
1,000 µs |
| Max. negative test pulse with logic 1 |
800 µs |
| Switch output |
NPN |
| Characteristic coil data |
24 V DC: 1.8 W |
| Permissible voltage fluctuation |
-15 % / +10 % |
| Operating medium |
Compressed air in accordance with ISO8573-1:2010 [7:4:4] |
| Note on operating and pilot medium |
Lubricated operation possible (subsequently required for further operation) |
| Vibration resistance |
Transport application test at severity level 2 in accordance with FN 942017-4 and EN 60068-2-6 |
| Shock resistance |
Shock test with severity level 2 in accordance with FN 942017-5 and EN 60068-2-27 |
| Corrosion resistance classification CRC |
0 - No corrosion stress |
| Max. magnetic interference field |
60 mT |
| Medium temperature |
-5 ... 50 °C |
| Sound pressure level |
85 dB(A) |
| Protection against direct and indirect contact |
Protective extra-low voltage with safe disconnection (PELV)
Protected to EN 60950/IEC 950 |
| Pilot medium |
Compressed air in accordance with ISO8573-1:2010 [7:4:4] |
| Ambient temperature |
-5 ... 50 °C |
| Nominal altitude of use |
1000m in accordance with VDE 0580 |
| Product weight |
1,134 g |
| Operating voltage range, DC sensor |
10 ... 30 V |
| Short-circuit strength sensor |
Pulsing |
| Idle current sensor |
<= 10 mA |
| Max. output current sensor |
200 mA |
| Max. switching frequency sensor |
5,000 Hz |
| Residual ripple sensor |
± 10 % |
| Voltage drop sensor |
<= 2 V |
| Electrical connection |
Plug pattern type C to EN 175301-803
to EN 175301-803
Without mains earth |
| Sensor connection |
Plug
3-pin
M8x1 |
| Mounting type |
with through hole |
| Pneumatic connection, port 1 |
G1/4 |
| Pneumatic connection, port 2 |
G1/4 |
| Pneumatic connection, port 3 |
G1/4 |
| Materials note |
Conforms to RoHS |
| Material seals |
FPM
HNBR
NBR |
| Material housing |
Aluminium die cast
PA |
| Material screws |
Steel
Galvanised |
| Switching element function |
Normally closed contact |
Newsletter